Review Xetron Elog 10 USB

The instrument acts, is aesthetically pleasing and takes up little space, but...

• ... it is difficult to use and has the following problems:
• the software is complicated to install 
• and moreover I stopped because it requires me to disable the computer's security system. Unacceptable
• the batteries have a very limited life span

Item. returned to Amazon

____________________

The Xetron Elog 10 USB is a temperature and humidity data logger designed for monitoring environmental conditions in various settings, such as cold chains, laboratories, and storage facilities.

Key Features:

• Measurement Parameters: Temperature and humidity.
• Measurement Range: Temperature: -22°F to 158°F (-30°C to 70°C); Humidity: 0% to 95% RH without condensation.
• Resolution: Temperature: 0.1°C; Humidity: 0.1% RH.
• Accuracy: Temperature: ±0.5°C; Humidity: ±3% RH.
• Data Storage Capacity: Up to 32,000 data points.
• Dimensions and Weight: Approximately 97 x 43 x 12 mm; weighs about 65 grams.
• Storage Conditions: -22°F to 158°F (-30°C to 70°C); 0% to 95% RH without condensation.
• External Probe: Equipped with an external temperature and humidity probe for more flexible measurements.
• USB Interface: Direct USB connection for easy data retrieval and configuration.
• Automatic PDF Report Generation: Generates PDF reports automatically upon connection to a computer, eliminating the need for additional software.

Setup and Operation:

1. Connecting the Device:

   • Remove the protective cap to expose the USB connector.
   • Insert the device into an available USB port on your computer.

2. Configuring the Logger:

   • Upon connection, the device will generate a PDF report automatically.
   • For advanced configuration, such as setting logging intervals or alarm thresholds, you may need to install specific data management software.

3. Starting and Stopping Data Logging:

   • To start logging, press and hold the designated button on the device until the indicator light activates.
   • To stop logging, press and hold the same button until the indicator light turns off.

4. Retrieving Data:

   • Connect the device to your computer via the USB port.
   • Access the automatically generated PDF report to review the recorded data.